Process Technology LUFRAN Instruction page 13

Model Number Explanation (continued):
130-6UU6-C2-RI

Flow Meter Device. The flow meter device is part of the DAC temperature
control system. The flow meter is selected based upon total wattage of the
heater and operating flow rate range.
maintenance or re-calibration.
Heater Model
Number
0-4
5
6
7
8
9

Options. There are several options available with the Lufran fluoropolymer inline
water heater.
OPERATION section of this manual. More than one option may be included in
an individual Lufran heater. Please refer to the table below for a brief listing of the
available options.
Heater Refer to Page # for
Model a more detailed
Number
C1
C2
C3
C4
C5
C#
CS
RI
ROI
R#
RM
S4
##
M-43-01
Revision - Date: 08 – 04/06/15
    
Flow Monitor Device
Device Brand
Not Used
Ultrasonic Thornton
Ultrasonic Thornton
Ultrasonic Honda
Ultrasonic Honda
Ultrasonic Thronton
Some of these options are described in greater detail in the
explanation
Ethernet communications
Device net communications
RS232 communications
RS485 communications
Modbus communications
Additional communications option. Contact the Process
N/A
Technology technical service department for assistance.
N/A Color touch-screen interface
Expanded remote interface
N/A Remote touch-screen interface.
Additional remote interface option. Contact the Process
N/A
Technology technical service department for assistance.
Thornton resistivity monitor
N/A Stainless steel cabinet
Customer specific design/construction (Which may or may
N/A
not include some of the above options)

This device does not require routine
Connection Size
13mm (1/2-inch)
19mm (3/4-inch)
13mm (1/2-inch)
19mm (3/4-inch)
25mm (1-inch)
Description
- 13 -
Process Technology
Part Number
8136
8137
9238
09-6820
9964
Lufran Single Outlet Manual