Device Net Communications (-C2 Option ) - Process Technology LUFRAN Instruction

OPTIONAL COMMUNICATIONS (Continued):
DeviceNet (-C2 option):
The –C2 communications option adds DeviceNet communications to the PLC controller.
The network can interface with the Lufran heater through the DeviceNet male mini
connector included with the unit.
The Lufran heater is provided with the following default node assignment: 63. Once
connected to the network, the customer must assign a new node to the Lufran heater.
Assigning the node or performing other networking tasks with the Lufran heater will
require the use of DNI Utilities software, available from Allen-Bradley. This software
along with their instruction manual is available as a free download through their website:
http://www.ab.com/plclogic/micrologix/networkinterfaces
M-43-01
Revision - Date: 08 – 04/06/15
Figure 41: DeviceNet male mini connector plug
REMOTE
INTERFACE
CONNECTION
- 64 -
DEVICENET
MALE MINI
CONNECTOR
Lufran Single Outlet Manual