Process Technology LUFRAN Instruction page 46

Control Access Menu (Continued):
When the system is LOCKED the CONTROL ACCESS MENU will appear as follows:
Control Mode
Login Code
LOCAL MODE. This control mode allows heater control from the touch screen display of
LOCAL
the PLC. All menus and settings can be accessed and changed from the touch screens.
REMOTE MODE. This control mode allows heater control through the interface cable
REM
connection only. The customer provided remote control system can access and change
settings remotely.
REMOTE OPERATOR INTERFACE MODE.
Lufran heater includes the ROI option. This control mode allows ENABLE HEATER and
ROI
PROCESS SETPOINT heater control settings to be adjusted through the remote operator
interface heater control only. The customer can also access and change all other user
settings either locally or remotely.
ETHERNET MODE. This selection will only appear if the Lufran heater includes the
ENET
C1 communications option. This control mode allows heater control through the Ethernet
cable connection only. The Ethernet network can access and change settings remotely.
DEVICENET MODE. This selection will only appear if the Lufran heater includes the
C2 communications option.
DNET
DeviceNet cable connection only. The DeviceNet network can access and change settings
remotely.
MODBUS MODE. This selection will only appear if the Lufran heater includes the C5
MBUS
communications option. This control mode allows heater control through the Modbus
cable connection only. The Modbus network can access and change settings remotely.
M-43-01
Revision - Date: 08 – 04/06/15
Figure 31: Control Access Menu Screen (locked)
Description
This selection will only appear if the
This control mode allows heater control through the
- 46 -
Lufran Single Outlet Manual