Installation; Inspection And Uncrating - Process Technology LUFRAN Instruction

INSTALLATION:

Note: Before installation, carefully read this entire section. The installation of this unit
must be performed by qualified technicians.

Inspection and Uncrating:

The Lufran fluoropolymer inline water heater is shipped in a horizontal position. The
unit must be raised to a vertical orientation before it can be removed from the shipping
crate.
1) Inspect the shipping crate for evidence of damage. If any damage is detected,
contact the carrier immediately.
2) Inspect the shock sensors located on the outside of the crate. The shock sensors
will indicate if the unit experienced rough handling. If the sensors indicate that the
unit has experienced rough handling, contact the carrier immediately.
3) Secure crate with adequate straps and carefully lift into a vertical position.
M-43-01
Revision - Date: 08 – 04/06/15
Due to the weight of the unit, DO NOT
ATTEMPT to move or lift the unit without the
appropriate material handling equipment.
Figure 6: Shockwatch Sensor
- 16 -
Lufran Single Outlet Manual