Remote Touch-Screen Interface (-Roi Option) - Process Technology LUFRAN Instruction

REMOTE TOUCH-SCREEN INTERFACE (-ROI Option):

The remote touch-screen interface (ROI) is used for communication between the Lufran
fluoropolymer inline water heater and a remote touch-screen device. The remote touch-
screen will allow remote operation of heater in the same manner as the touch-screen
device mounted within the heater cabinet.
The unit must be in ROI control mode in order to operate the unit through the remote
touch-screen interface. However, the screen displays are shown when in any mode of
operation. Refer to the CONTROL ACCESS menu listed in the OPERATIONS section
of this manual to change the PLC control system to ROI control mode.
Figure 35: ROI Panel "REMOTE TOUCH_SCREEN INTERFACE"
Left Side of Unit
Figure 36: Customer Interface Panel
M-43-01 Lufran Single Outlet Manual
Revision - Date: 08 – 04/06/15
- 61 -