Facility Requirements; Space Requirements - Process Technology Lufran LUF Series Manual

Engineering Information (Continued):

Facility Requirements:

Before installing the Lufran fluoropolymer inline water heater confirm the facility requirements listed
below.

Space Requirements:

The Lufran fluoropolymer inline water heater is constructed in a freestanding enclosure. This cabinet
includes the common framework for the heating column(s) as well as the electrical components. No
additional support is required.
Figure 3: Clearance Dimensions (24-78kW units shown)
The dimensions of the specific model are based upon the unit wattage. The cabinet assembly requires
ventilation. Locate equipment so that ventilation fans on the top and bottom of the enclosure and louvers
on the sides are not obstructed.
overheating of the unit. Be sure to provide adequate clearance for normal operation and maintenance of
this heater.
Heater Wattage Number of Heating
(kW)
24-78
105-156
195-312
M-43-25
Revision - Date 03-01-04-18
The ventilation fan exhausts through these openings, preventing
Typical Cabinet Dimensions
Width
Columns
1 508mm (20-in)
2 712mm (28-in)
3-4 1220mm (48-in)
Depth
769mm (30.25-in)
769mm (30.25-in)
769mm (30.25-in)
11
LUF-Series Lufran Manual
Standard outlet, Standard Interface
Height
2123mm (83.57-in)
2123mm (83.57-in)
2123mm (83.57-in)