Operational Guidelines; The Engineering And Operator Personalities; How To Load And Change Us Personalities - Honeywell Enhanced Micro TDC 3000 User Manual

5

OPERATIONAL GUIDELINES

Section 5
This section provides guidance for the operation of the Enhanced Micro TDC 3000 system.
Node loading and area change procedures are provided which are tailored for the Enhanced
Micro TDC 3000 system, and references are made to additional operating guidelines and
instructions.

5.1 THE ENGINEERING AND OPERATOR PERSONALITIES

Each Universal Station (US) in a basic Enhanced Micro TDC 3000 system can be loaded
with either the Universal Personality or the Operator Personality. When the Universal
Personality is loaded in a station, both operations functions and engineering (configuration)
functions can be performed. If the Operator Personality is loaded, only operations
functions can be performed.
The Universal Personality is used to implement (or configure) the system to meet the needs
of its particular application. Implementation Guidelines for the Enhanced Micro TDC 3000
system are provided in Section 4.
The Operator Personality is used by process operators and supervisors for day-to-day
operation of the system and management of the process. It is also used by process
engineers to verify operations and control strategies and to see the results of implementation
activities that were accomplished in the Universal Personality.
Detailed operating instructions for engineering functions within the Universal Personality
are provided in several data-entry publications in the Implementation binders. Detailed
operating instructions for the Operator Personality or operations functions within the
Universal Personality are provided in the Process Operations Manual in the Process
Operations binder. In that binder you should also find a plastic envelope that contains a
pocket-sized Operator's Digest.

5.1.1 How to Load and Change US Personalities

The easiest way to change the personality of a US is through the Console Status display on
another US. If there is only one US or if there are two USs, but neither one is running, a
"bootload" procedure must be used to load a personality into a US.
Enhanced Micro TDC 3000 User's Manual 5-1 9/95