Honeywell Enhanced Micro TDC 3000 User Manual page 36

2.7.3 Cabling EPDGP I/O Board
EPDGP I/O boards (see Figures 2-10 and 2-11) interface nearly all the peripherals of the
Enhanced Micro TDC 3000 Control System. You are now going to connect those cables
which could not be installed at the factory.
TSI Orientation
Engineer Supervisor
Keyboard Keyboard
J11 Pinning
Jumper Vertical Sync
Signal
DIRECT
DIR VSYNC INV
INVERT
Figure 2-10 — CRT Background Shade Pinning and Sync on the EPDGP I/O
EPDGP I/O boards can be pinned for default background shading(J9 and J10) and vertical
sync (J11) for the monitor as shown in Figure 2-10.
SCSI
51304584-300
EPDGP I/O
J2
Printer Connector
CRT Adapter Cable
Cable from CRT
Figure 2-11 — EPDGP-I/O Cabling
Universal Station Type
Classic with keyboard power supply
Classic without keyboard power supply
Ergonomic furniture with 21" FST monitor
Enhanced Micro TDC 3000 User's Manual
J1
J8
51304584-300
TS1
EPDGP I/O
J2 J7
J1
J8
TS1
J11
J5 J4
J7 J3 J6
Supervisor
Keyboard
Mouse or Trackball
2-12
Default CRT Background
J9 J10
1 1 Black
0 1 Light Grey (Dim)
1 0 Med. Grey (Brighter)
0 1
J10
0 0 Warm Grey (Brightest)
J9
0 1
J11
J5 J4
J3 J6
Trackball/Mouse Connector
Mouse Adapter Cable #51304033-045
Power (Touchscreen/Keyboard)
Engineer Keyboard
Engineer
Keyboard
EPDGP I/O Assembly
51304584-100
51304584-200
51304584-300
2.7.3
51090
51091
9/95