Field Adjustments - Honeywell Enhanced Micro TDC 3000 User Manual

6.2

6.2 FIELD ADJUSTMENTS

There are no field adjustments for the Enhanced Micro TDC 3000 Control System other
than those for the 21" color monitor. When replacing a board, you may have to change
some pins (or jumpers) on the board to make the board correspond with the counterpart it is
replacing. Do not alter pinning on a board revision socket—the revision number might
have changed on the newer board.
The EPDGP-I/O board has pinning options to set the default background shade for the
CRT if a palette has not been set in a schematic. You may find additional information on
the Set Palette command in the Picture Editor Reference Manual in the Implementation/
Engineering Operations - 2 binder. The EPDGP also has a configuration option that is set
for either the Engineer's Keyboard or the Supervisor's Keyboard. (If both keyboards are
installed, the EPDGP is set up for the Supervisor's Keyboard and the Engineer's Keyboard
is connected into the Supervisor's Keyboard.)
Enhanced Micro TDC 3000 User's Manual 6-4 9/95