Honeywell Enhanced Micro TDC 3000 User Manual page 97

2. CONT (contrast) control
Turn this control to adjust the contrast of the display.
3. RRC (Raster Rotation Circuit) control
Turn this control to correct the raster tilt.
NOTE: Using this control also removes poor purity from around the CRT, which is
generated when swiveling the unit.
4. PCC (Pincushion Correction Circuit) control
Turn this control to correct both right and left side distortion of the display.
5. V-SIZE (vertical size) control
Turn this control to adjust the vertical size of the display.
6. V-POSI (vertical position) control
Turn this control to adjust the center of the display vertically.
7. H-SIZE (horizontal size) control
Turn this control to adjust the horizontal size of the display.
Enhanced Micro TDC 3000 User's Manual
Raster Tilts
Rightward
Barrell
5-15
5.4.1
More Less
Leftward
Pincushion
Enlarge Lessen
Up Down
Enlarge Lessen
9/95