Therapy Progress; Shorttime; Longtime - Atmos Thorax C 051 Operating Instructions Manual

4.7 Therapy progress

The ATMOS C 051 Thorax has 2 graphical diagrams to
®
analyse the development of Air-Flow and actual vacuum.
Selection menu
By selecting the button you reach the graphical
diagram modus. By pressing the buttons you can select
the modus of your choice e.g. long / shorttime.

4.7.1 Shorttime

The graphical diagram starts by selecting the menu.
In this modus the real measurements (flow, vacuum)
from the last 30 seconds can be shown.
Therefore you can visualise cough tests and
other proceedings.
By pressing the button the diagram can be
frozen to enable a graphical interpretation. When you press the
button again the shorttime diagram is restarted.
By pressing the button you will return to
the main menu.

4.7.2 Longtime

In the longtime modus the complete therapy progress can be
visualised.
The scaling can be switched between time and

flow.
You can reach the different scalings by pressing the

, button or the
The scale can be increased or decreased by pressing

the button or the
 Time scaling:
- The endpoint on the right side of the graphic is
always the actual point of time.
- The scaling can be selected in 7 steps, between the
display of the past 60 minutes and the last 12 days.
- A vertical line shows when the therapy was interrupted.
 Flow scaling:
- The scaling can be selected between 0 – 0,55 l/min
and 0 – 5,5 l/min in 4 steps.
 Vacuum scaling:
- Scaling can be selected in 3 steps between 0 - 110 mbar
(= cm H O) and 0 - 22 mbar (= cm H
2
button.
button
O).
2
25