4.2.2 Display symbols
Figure
4.3 Switch on
Battery status display / charging indicator
Keylock active
Therapy recording in progress
Therapy on hold
Therapy in progress
Upcoming warning suppressed
Safety check required
1. To switch on the ATMOS
sensor above of the
2. The welcome monitor appears with the software version number in
the bottom right corner.
3. After a short while the leakage test (chapter 4.4) starts automatically.
4. Subsequently "Therapy progress" will appear in the display.
By pressing the buttons you can start a new therapy recording or
continue recording.
5. The main display appears.
The device is now ready for use.
Function
C 051 Thorax please touch the
®
symbol for 2 seconds.
21