LED
Table 13. 10GBase-T RJ-45 port LEDs
LED
Link LED
Activity LED
Prerequisites
The following is a list of required and optional components for the S4100–ON Series (S4128F-ON, S4148F-ON, S4148FE-ON, S4128T-ON,
S4148T-ON, and S4148U-ON) switch:
NOTE:
Detailed installation instructions are provided in the
•
S4100–ON Series (S4128F-ON, S4148F-ON, S4148FE-ON, S4128T-ON, S4148T-ON, or S4148U-ON) switch, or multiple switches, if
stacking
•
AC country- and regional-specific cables to connect the AC power source to each of the switches' AC power supplies
•
Mounting brackets for rack installation, included
•
Screws for rack installation
•
#1 and #2 Phillips screwdrivers, not included
•
Torx screwdriver, not included
•
Ground cable screws, included
•
Copper or fiber cables
Other optional components are:
•
Ground cable and lug for the frame-end of the ground cable
•
Extra power supply unit
•
Extra fan module
•
Extra mounting brackets if installing in a four-post rack or cabinet
S4100-ON Series configurations
The S4100-ON Series (S4128F-ON, S4148F-ON, S4148FE-ON, S4128T-ON, S4148T-ON, and S4148U-ON) switches are available in several
different configurations.
All S4100-ON Series switches include the following configurations:
•
Fan with airflow from the I/O side to the PSU side—normal
•
Fan with airflow from the PSU side to the I/O side—reverse
•
AC power supply with airflow from the I/O side to the PSU side—normal
18
S4100–ON Series switch
Description
•
Flashing yellow, 1 second on/off—Port beacon
Description
•
Off—No link
•
Solid green—Link operating at a maximum speed,
autonegotiated/forced or 10G
•
Solid yellow—Link operating at a lower speed, autonegotiated/
forced or 1G/10M/100M
•
Solid blue—Port beacon
•
Off—No link
•
Flashing green—10G port activity
•
Flashing amber—1G/100M/10M Port activity.
Site preparations
and
S4100-ON Series installation
sections.