LED
Table 4. QSFP28 port LEDs
LED
Link/Activity LED—100G, 40G, or 10G
Link/Activity LED—4x25G mode or 4x10G mode
Link/Activity LED—2x50G mode
Prerequisites
The following is a list of components that are required and optional for successful switch installation:
NOTE:
For detailed installation instructions, see
•
Z9264F-ON switch or multiple switches, if stacking
•
AC or DC country- and regional-specific cables to connect the AC or DC power source to each of the AC or DC power supplies
•
Rail mounting brackets for rack installation, included
•
M4 screws for rack installation
•
#1 and #2 Phillips screwdrivers, not included
•
Torx screwdriver, not included
•
Ground cable screws for L-bracket, included
•
Copper/fiber cables
Other optional components are:
•
M4 ground cable screw
•
Extra power supply unit
•
Extra fan module
NOTE:
The DC ground lug kit ships with the other accessories inside the shipping box.
Description
•
Flashing green—port activity
Description
•
Off—No link
•
Solid green—Link operating at maximum speed, 100G for
QSFP28 port
•
Flashing green—Port activity operating at maximum speed,
100G for QSFP28 ports
•
Solid yellow—Port activity operating at a lower speed, 40G or
10G port
•
Flashing yellow, 1 second on/off—Port beacon
•
Off—No link
•
Solid green—Link operating at maximum speed, 4x25G port
•
Flashing green—Link activity operating at maximum speed,
4x25G port
•
Solid yellow—Link operating at a lowr speed, 4x10G port
•
Flashing yellow, 1 second on/off—Port beacon
•
Off—No link
•
Solid yellow—Link operating at a lower speed, 2x50G port
•
Flashing yellow—Port activity at a lower speed, 2x50G port
•
Flashing yellow, 1 second on/off—Port beacon
Site preparations
and
Z9264F-ON switch
installation.
Z9264F-ON switch
11