Prerequisites; Luggage Tag - Dell EMC SD-WAN Edge 3000 Series Installation Manual

LED
10 GbE SFP+ port LEDs—SFP3 and SFP4
Table 2. BMC and CPU Console and management Ethernet port LEDs
LED
Link LED
Activity LED

Prerequisites

For installation instructions, see
The following is a list of components need to install the Edge 3000 Series platform:
• Dell EMC SD-WAN Edge 3400 or 3800 platform
• AC country- and regional-specific cables
• Two-post rail kit mounting brackets for rack installation, included
• Screws for rack installation
• #1 and #2 Phillips screwdrivers, not included
• M2 Philips drive flat head screwdriver, not included
• Ground cable screws for L-bracket—order separately
• M3 ground lug assembly kit screw
• Copper/fiber cables
Other optional components are:
• Expansion card
• UL-certified ground lug assembly kit with bracket
• Extra mounting brackets for the four-post mount

Luggage tag

The Edge 3000 Series has a pull-out tag, known as a luggage tag, on the I/O-side of the platform. The front of the luggage tag includes
platform ID information.
10 Edge 3000 Series
Site preparations and Edge 3000 Series
Description
• Off—No link
• Solid green—Link operating at maximum speed, 10G
• Solid yellow—Link operating at a lower speed, 1G
• Flashing green—port activity for 10G
• Flashing yellow—port activity for 1G
Description
• Off—No link
• Solid green—Link operating at a maximum speed,
autonegotiated/forced or 1G
• Solid yellow—Link operating at a lower speed, autonegotiated/
forced or 10/100M
• Off—No link
• Flashing green—Port activity
installation.