Table of Contents
Advertisement
LED
Activity LED
Table 5. SFP28 port LEDs
LED
Link LED
Activity LED
Table 6. QSFP28 port LEDs
LED
Link LED
Activity LED
Prerequisites
The following is a list of components that are required for successful switch installation:
NOTE:
For detailed installation instructions, see
•
N3200-ON Series switch or multiple switches, if stacking
•
AC or DC country- and regional-specific cables to connect the AC or DC power source to the AC or DC PSU
•
Hot-swappable AC or DC power supply units; minimum one AC or DC PSU
Description
•
Off—No link
•
Solid green—Link operating at maximum speed, 10G
•
Solid yellow—Link operating at a lower speed, 1G
•
Flashing green, ~30ms—Port activity operating at maximum
speed, 10G port
•
Flashing yellow, ~30ms—Port activity operating at lower
speed, 1G port
•
Flashing yellow, 1 second on/off—port beacon
•
Off—No activity
•
Flashing green—port activity at maximum speed
•
Flashing yellow—port activity at lower speed
Description
All four LEDs:
•
Off—No link
•
Solid green—Link operating at maximum speed, 25G
•
Solid yellow—Link operating at a lower speed, 10G or 1G
•
Flashing green, ~30ms—Port activity operating at maximum
speed, 25G port
•
Flashing yellow, ~30ms—Port activity operating at lower
speed, 10G or 1G port
•
Flashing yellow, 1 second on/off—port beacon
•
Off—No activity
•
Flashing green—port activity at maximum speed
•
Flashing yellow—port activity at lower speed
Description
All four LEDs:
•
Off—No link
•
Solid green—Link operating at maximum speed, 25G
•
Solid yellow—Link operating at a lower speed, 10G or 1G
•
Flashing green, ~30ms—Port activity operating at maximum
speed, 25G port
•
Flashing yellow, ~30ms—Port activity operating at lower
speed, 10G or 1G port
•
Flashing yellow, 1 second on/off—port beacon
•
Off—No activity
•
Flashing green—port activity at maximum speed
•
Flashing yellow—port activity at lower speed
Site preparation
and
N3200-ON Series switch
installation.
N3200-ON Series switch
11
Advertisement
Table of Contents
