Connecting The Power Supply - Digital Projection M-Vision 18K Series Installation And Quick Start Manual

Digital Projection M-Vision Laser 18K Series

Connecting The Power Supply

Firmly push the mains connector into the socket
Installation and Quick-Start Guide

CONNECTING THE POWER SUPPLY

1 2
, then press the ON/OFF switch
1 2
.
Notes
Use only the power cable
provided.
Ensure that the power outlet
includes a ground connection as
this equipment MUST be earthed.
Handle the power cable carefully
and avoid sharp bends. Do not
use a damaged power cable.
When operating on 110V Light
output power is reduced by approx
35%.
Rev D October 2019
page 4