Connecting The Power Supply - Digital Projection TITAN LASER WUXGA Installation & Quick Start Manual

Connecting the power supply

Rest of the World:
1. Firmly push the mains connector into the socket
USA Only
1. Firmly push the mains connector into the socket
2. Rotate the connector 90° clockwise to lock it in place
Installation & Quick Start Guide
Connecting the power supply
1
2
1 2
Digital Projection Ltd. Titan Laser WUXGA
Notes
Use only the power cable
provided.
Ensure that the power
outlet includes a ground
connection as this
equipment MUST be
earthed.
Handle the power cable
carefully and avoid sharp
bends. Do not use a
damaged power cable.
Rev A January 2019
page 13