Connecting The Power Supply - Digital Projection Titan Laser Series Manual

Important Information

Connecting the power supply

Rest of the world:
Firmly push the mains connector into the socket.
1
USA only:
Firmly push the mains connector into the socket.
2
Rotate the connector 90° clockwise to lock it in place
Use only the power cable provided.
Ensure that the power outlet includes a ground connection as this equipment MUST be
earthed.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged power
cable.
Page 22
1
2
Digital Projection Titan Laser Series
Rev A January 2019