Appendix D: Glossary Of Terms - Digital Projection M-Vision 18K Series Installation And Quick Start Manual

Digital Projection M-Vision Laser 18K Series

Appendix D: Glossary Of Terms

1080p
An HDTV resolution which corresponds to 1920 x 1080
3D active glasses
Wireless battery-powered glasses with LCD shutters. Synchronization information is communicated to the glasses by means of an infrared
(IR) or radio frequency (RF) emitter which is connected to the Sync Out terminal on the projector. IR or RF pulses are transmitted by the
emitter to signal when the left eye and right eye images are being displayed. The glasses incorporate a sensor which detects the emitter's
signal and synchronises the left and right eye shutters with the projected image.
3D passive glasses
Passive glasses do not require a power source to work. Light with left-hand polarisation can pass through the left lens and light with right-
hand polarisation can pass through the right-hand lens. These glasses are used in conjunction with another device which polarizes the image,
such as a ZScreen.
Adjust lines
A pattern applied to the image where its edge is to be blended with another image. Adjust lines are used to position the projectors in the array
during the edge blend process.
Anamorphic lens
A special lens which, when used with the
Aperture
The opening of the lens that determines the angle through which light travels to come into focus.
Reference Guide
APPENDIX D: GLOSSARY OF TERMS
pixels (a widescreen
TheaterScope aspect ratio, allows watching 2.35:1 content packed in a 16:9 source.
aspect ratio of 16:9).
Notes Notes
Rev D October 2019
page 97