Ac Power Precautions; Connecting The Power Supply - Digital Projection E-Vision Laser 15000 Series Instruction Manual

AC Power Precautions

AC Power Precautions
Warning! Death or Serious Injury could occur if the following precautions are
ignored
Shock Hazard! Only use the AC power cord provided or recommended by the
manufacturer
Fire & Shock Hazard! Do not operate the product unless the power cord, socket and
plug meet local rating standards
Do not attempt operation if the AC supply is not within the specified parameters
The AC power cord must be inserted into a socket with grounding
Disconnect the product from the AC supply before installing, moving, servicing,
cleaning or removing covers
Do not use an AC power cord that appears damaged
Do not overload power sockets or extension cords

Connecting the power supply

1. Adjust the VOLTAGE SELECT switch to
the required voltage
2. Firmly push the mains connector into
the AC In socket
Use only the power cable provided.
Ensure that the power outlet includes a
ground connection as this equipment MUST
be earthed.
Handle the power cable carefully and avoid
sharp bends. Do not use a damaged power
cable.
Important Information
1
2
Digital Projection E-Vision Laser 15000 Series
1 2
Rev B April 2021
page 27