Table of Contents
Advertisement
Connecting the power supply
Rest of the World:
1. Firmly push the mains connector into the socket
2. Rotate the connector 90° clockwise to lock it in place
USA Only
1. Firmly push the mains connector into the socket
2. Rotate the connector 90° clockwise to lock it in place
Installation & Quick Start Guide
Connecting the power supply
2
1
2
Digital Projection Ltd. Titan Laser WUXGA
Notes
Use only the power cable
provided.
Ensure that the power
outlet includes a ground
connection as this
equipment MUST be
earthed.
Handle the power cable
carefully and avoid sharp
bends. Do not use a
damaged power cable.
The USA model can
operate at 110V or 200V.
Voltage selection is
automatic, but the
projector must be
powered off before
switching power outlets.
Light output power is
reduced to approx 30%
when using the USA
model and operating on
110V.
Rev B September 2019
page 13
Advertisement
Table of Contents
