Description
3.2 Rack-mounted housing
3.2
Rack-mounted housing
2
1
①
②
③
④
Figure 3-1
● The device is fastened, for example, in a cabinet or frame with four screws, see Installing
(Page 81).
● The front panel is equipped with a display
– Open the door for maintenance purposes by loosening the screws, see Rack-mounted
– Tighten the screw on the door with a torque of 0.7 Nm.
● The device has space for the installation of two option modules and two analyzer modules
AM1
left. More information on the mounting locations of the option modules can be found in
section Mounting locations of option modules (Page 76).
26
Power supply
Processing unit
Mounting location AM1
Mounting location AM2
Design of rack-mounted enclosure
housing tool (Page 67).
③
④
and AM2
. The power supply
3
4
6
7
8
⑤
Door
⑥
Ethernet service interface
⑦
Keyboard
⑧
Display
⑦
⑥
, a keypad
, and a removable door
①
and the processing unit
Operating Instructions, 05/2015, A5E31874006-03
5
⑤
.
②
are located on the
Rack-mounted device