Technical Specifications Of Rack-Mounted Housing; Table 11-1 Rack-Mounted Enclosure: General Technical Specifications; Table 11-2 Rack-Mounted Enclosure: Electrical Characteristics; Table 11-3 Rack-Mounted Enclosure: Electrical Inputs And Outputs - Siemens SIPROCESS GA700 Operating Instructions Manual

Technical specifications

11.2 Technical specifications of rack-mounted housing

11.2 Technical specifications of rack-mounted housing
Table 11-1
General
Installation position
Weight
Degree of protection
Table 11-2
Electrical characteristics
Auxiliary power supply
Power consumption
EMC interference immunity (electro‐
magnetic compatibility)
Electrical safety
Power unit cable
Table 11-3
Electrical inputs and outputs
Digital outputs (DO)
Digital inputs (DI)
Service interface (rear)
Service interface (front)
124
Rack-mounted enclosure: General technical specifications
Rack-mounted enclosure: Electrical characteristics
Rack-mounted enclosure: Electrical inputs and outputs
Horizontal
Approx. 8.5 kg
IP20 according to EN 60529
100 to 240 V AC (nominal range of use 85 to 264 V)
50 to 60 Hz (nominal range of use 47 to 63 Hz)
280 VA max.
In accordance with the standard requirements of NA‐
MUR NE21 (05/2006) and EN 61326-1 (2013)
In accordance with EN 61010-1, overvoltage category II
Cable diameter max. Ø 10 mm
3 x 2.1 mm
2
8, with changeover contacts, parameters can be freely as‐
signed, e.g. for measuring range identification; max. load: 24
V AC/DC/1.7 A (total load for all 8 relay outputs in continuous
operation max. 160 W), floating, non-sparking
8, designed for 24 V, isolated, freely parameterizable, e.g. for
autoranging
Ethernet RJ 45, 100 MBit
Ethernet RJ 45, 100 MBit
Operating Instructions, 05/2015, A5E31874006-03
, core diameter max.
2
Rack-mounted device