Figure 7-1 Connecting The Power Supply - Siemens SIPROCESS GA700 Operating Instructions Manual

Connecting
7.1 Electrical connections
Procedure
①
Figure 7-1
1. Connect the wires of the connecting cable to the appliance plug
supply and PE conductor connections are correct!
If you are using the power plug that is available as an option, tighten the screws in the
appliance plug with the following torques:
– 0.5 Nm at the terminals
– 0.3 Nm at the cable terminals (strain relief) and the connector enclosure
2. Connect the appliance plug
84
Power supply
Connecting the power supply
②
Appliance plug
②
to the power supply
Operating Instructions, 05/2015, A5E31874006-03
②
. Ensure that the power
①
.
Rack-mounted device