Technical Specifications Of Rack-Mounted Housing - Siemens SIPROCESS GA700 Compact Operating Instructions

Technical specifications
10.2 General technical specifications
10.2.2

Technical specifications of rack-mounted housing

Table 10- 2
General
Installation position
Weight
Degree of protection
Table 10- 3
Electrical characteristics
Auxiliary power supply
Power consumption
EMC interference
immunity (electro-
magnetic compati-
bility)
during operation:
Electrical safety
Power unit cable
Table 10- 4
Electrical inputs and outputs
Digital outputs (DO)
Digital inputs (DI)
Service interface (rear)
Service interface (front)
84
Rack-mounted enclosure: General technical specifications
Rack-mounted enclosure: Electrical characteristics
with one and/or two
OXYMAT 7 /
ULTRAMAT 7 units
with one or two
CALOMAT 7 units
Rack-mounted enclosure: Electrical inputs and outputs
Horizontal
Approx. 8.5 kg
IP20 according to EN 60529
100 to 240 V AC (nominal range of use 85 to 264 V)
50 to 60 Hz (nominal range of use 47 to 63 Hz)
Max. 280 VA
in accordance with the standard requirements of
NAMUR NE21 (05/2006) and EN 61326-1 (2013)
in accordance with the standard requirements
NAMUR NE21 (05/2006) and EN 61000-6-
2:2005
in accordance with EN 61010-1, overvoltage category II
Cable diameter: max. diam. 10 mm
•
Core cross-section: max. 3 x 2.1 mm
•
8, with changeover contacts, parameters can be freely
assigned, e.g. for measuring range identification; max. load:
24 V AC/DC/1.7 A (total load for all 8 relay outputs in con-
tinuous operation max. 160 W), floating, non-sparking
8, designed for 24 V, isolated, freely parameterizable, e.g.
for autoranging
Ethernet RJ 45, 100 Mbps
Ethernet RJ 45, 100 Mbps
Compact Operating Instructions, 05/2018, A5E35134047-03
No
2
2
Devices in explosion-proof design