Design Of Rack-Mounted Housing - Siemens SIPROCESS GA700 Operating Instructions Manual

Description

4.2 Design of rack-mounted housing

4.2 Design of rack-mounted housing
2
1
①
②
③
④
Figure 4-1
The device is secured with four screws, for example in a cabinet or frame, see section "Installing
the rack-mounted device (Page 53)".
The front panel is equipped with a display
is locked with screws and may only be opened for maintenance purposes by loosening the
screws, see section "Rack-mounted housing tool (Page 56)".
The device provides space for the installation of two option modules and two analyzer modules
AM1
More information on the mounting locations of the option modules can be found in section
Mounting locations of option modules (Page 63).
20
Power supply unit
Processing unit
Mounting location AM1
Mounting location AM2
Design of rack-mounted housing
③ ④
and AM2 . The power supply
3
4
6
7
8
⑤
Door
⑥
Ethernet service interface
⑦
Keyboard
⑧
Display
⑧ ⑦
, a keypad , and a removable door
①
and the processing unit
Operating Instructions, A5E31874006-12
5
⑤
. The door
②
are located on the left.
Rack-mounted device