Spare Parts/Accessories; Notes - Siemens SIPROCESS GA700 Operating Instructions Manual

Continuous gas analysis, rack-mounted device
Hide thumbs Also See for SIPROCESS GA700:
Table of Contents

Advertisement

Appendix
A.6 Spare parts/accessories
A.6

Spare parts/accessories

A.6.1

Notes

Improper device modifications
Danger to personnel, system and the environment can result from modifications and repairs
to the device, especially in hazardous areas.
● Only carry out modifications or repairs as described in the instructions for the device.
Note
Qualified Personnel
Qualified personnel are persons who are familiar with the installation, mounting,
commissioning, and operation of the product. These people have the following qualifications:
● They are authorized, trained or instructed in operating and maintaining devices and systems
according to the safety regulations for electrical circuits, high pressures, and aggressive
as well as dangerous media.
● They are trained or instructed in maintenance and use of appropriate safety equipment
according to the safety regulations.
Note
Completeness/timeliness of spare parts lists
The following spare parts lists were correct at the time this documentation was issued. Interim
changes or updates are not included. Information about the latest spare parts can be found in
the catalogs and/or on the Internet. You can also contact you Siemens sales representative
for more information if needed: → Technical support (Page 144).
Note
Classification of spare parts
All spare parts in the spare parts lists are listed with the classifications "1" or "2" and are
available for order. However, the classification indicates a permission for use:
● The use of Class 2 spare parts is allowed only after appropriate training provided by
Siemens AG. The use of Class 2 spare parts without prior training voids the manufacturer
warranty of the device/module.
● The general information contained in this document apply to qualification for Class 1 spare
parts. Additional training by Siemens AG is not required.
You can obtain additional information about this from your Siemens sales representative.
146
WARNING
Failure to follow the instructions will void the manufacturer's warranty and product
approvals.
Rack-mounted device
Operating Instructions, 05/2015, A5E31874006-03

Advertisement

Table of Contents
loading

Table of Contents