Instructions For Use - Otto Bock 6A30-20 Instructions For Use Manual

► If the product is damaged, check it for proper function and readiness
for use.
► In case of changes in or loss of functionality, do not continue using the
product (see "Signs of changes in or loss of functionality during use" in
this section).
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern, a change in the positioning of the prosthetic components relat­
ive to each other and by the development of noises.
4 Scope of delivery
Quantity Designation
1

Instructions for use

1 Shuttle lock housing
1 Ratchet unit
1 Pin
1 Set screw
1 Dummy set
Consisting of: 1 plate dummy, 1 ratchet unit
dummy, 1 countersunk head screw, 4 nails
1 Dummy set
Consisting of: 1 cap screw, 1 sleeve dummy, 2
O-rings
Spare parts/accessories (not included in the scope of delivery)
Quantity Designation
– Pin, short
– Pin, long
5 Preparation for use
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
6A30=20 Shuttle Lock
Reference number
–
5X120
6A52=K
6Y13=1
506G21=M4x10
5X108
6A94
Reference number
6Y13=2
6A13=L1
15