Parameter Settings - Huawei UPS5000-S-880 kVA User Manual

UPS5000-S-880 kVA
User Manual (CMI)
Table 4-12 Monitoring details

4.2.2.1 Parameter Settings

Figure 4-47 Parameter settings
System Settings
Issue 02 (2020-01-10)
Number Area
1 Running status
area
2 Menu bar
3 Information
area
Item Description
High ambient An alarm is generated when the
temperature ambient temperature reaches or
alarm threshold exceeds the threshold specified
(° C) by this parameter.
Low ambient An alarm is generated when the
temperature ambient temperature is lower
alarm threshold than the threshold specified by
(° C) this parameter.
EPO detection Indicates whether to enable
emergency power-off (EPO).
EPO is performed only when this
parameter is enabled and the
EPO switch is triggered.
When EPO detection is changed
from Disable to Enable, check
that the EPO cable is connected
correctly.
Bus capa. life If this parameter is set to Enable,
Copyright © Huawei Technologies Co., Ltd.
Function
Displays the power flow and UPS running information.
Displays alarms and real-time data, sets parameters, and
provides control commands.
The Active Alarms page is displayed by default.
Displays system monitoring information.
4 User Interface
Default Value Value Range
55 40–60
–10 –20 to 0
Enable Disable, Enable
Disable Disable, Enable
128