Huawei UPS5000-S-880 kVA User Manual page 109

UPS5000-S-880 kVA
User Manual (CMI)
Item
IP address
Subnet mask
Gateway
MAC address
NAT mapping
Figure 4-14 RS485 settings
Item
Address
Baud rate
Parity mode
Issue 02 (2020-01-10)
Description
Specifies the IP address for the
Ethernet.
NOTICE
Ensure that the UPS IP address is
unique on the network segment.
Otherwise, the LCD cannot work
properly.
Specifies the subnet mask of the
Ethernet.
Specifies the Ethernet gateway.
Defines the physical address of
network equipment and cannot be
set.
NAT means network address
translation. If you set it to
Disable, Internet cannot access IP
addresses in the local area
network (LAN).
Description
This serial port address is
allocated by the user.
Select a baud rate to match the
user's network management
conditions onsite.
RS485 communication frame
composition bit. When a device
node uses RS485
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Value Range
192.168.0.10 1.0.0.0–
223.255.255.255
255.255.255.0 0.0.0.0–
255.255.255.255
192.168.0.1 1.0.0.0–
223.255.255.255
N/A N/A
Disable Disable, Enable
Default Value Value Range
1 1–254
9600 9600, 19200,
115200
None None, Odd,
Even
101