Alarms Screen - Huawei UPS5000-S-880 kVA User Manual

UPS5000-S-880 kVA
User Manual (CMI)
Table 4-8 Total runtime
Table 4-9 Environment data




4.1.2.3 Alarms Screen

Tap
Issue 02 (2020-01-10)
Item
Temperature (° C)
Backup time (min)
Remaining cap. (%)
SOH
Item
Bypass runtime (h)
Inv. runtime (h)
The value must be an integer. For example:
 If the value is less than 1, the value takes 0.
 If the value is greater than or equal to 1 and less than 2, the value takes 1.
Item
Ambient temperature (° C)
Ambient humid. (%RH)
Module Data: reflects each data of a module.
Battery Detailed Data - Batt. String Data: reflects the voltage, current, SOC, and SOH
data of each battery string.
Battery Detailed Data - String N Battery Data: reflects the temperature, voltage, internal
resistance, current, SOC, and SOH data of a single battery in the battery string.
on the System Info screen to enter the Alarms screen.
Copyright © Huawei Technologies Co., Ltd.
Description
Battery operating temperature (A battery sensor is
required. If the sensor is not installed, N/A is displayed).
Battery backup time estimated at the current load.
Remaining battery capacity.
State of health.
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
Description
Temperature measured by the ambient temperature and
humidity sensor. (An ambient temperature and humidity
sensor is required. If no sensor is connected, the ambient
temperature sampled by the bypass module is displayed.)
Humidity measured by the ambient temperature and
humidity sensor. If the sensor is not installed, N/A is
displayed.
4 User Interface
96