Table of Contents
Advertisement
UPS5000-S-880 kVA
User Manual (CMI)
Figure 5-2 Setting startup commissioning
Table 5-2 Parameter description
Item
Site
Device Type
Link
IP
Port
Username, Password
Step 5 After login, tap Power-on password activation on the screen. A message is displayed,
indicating whether to start the UPS. Tap OK.
Issue 02 (2020-01-10)
Setting Method
Select the site as required.
Select the device that needs to be connected. Select
UPS5000 in this situation.
Enable the connection between the device and the WiFi
network.
UPS IP address, which can be obtained from the MDU.
The port number is 443 by default and can be modified. If
the UPS is managed using the app, the port number must
be set to 443.
Same as the user name and password of WebUI accounts.
Copyright © Huawei Technologies Co., Ltd.
5 Operations
157
Advertisement
Table of Contents
