Adjusting The Starting Speed Of The Vertical Carriage - Planmeca proline xc Installation Manual

SETTING CUSTOMER PREFERENCES

5.3 Adjusting the starting speed of the vertical carriage

The user may wish to change the speed at which the ver-
tical carriage starts to move up and down.
Enter the Service Setting mode as describe in section
"Service mode" on page 15.
Upward movement
Select the Motor up adjustment from the Service settings
list.
The display shown below appears.
The current upward starting speed of the vertical carriage
as a percentage of the maximum speed is shown on the
display.
Installation manual Planmeca Proline XC X-ray unit 43