Requirements; Environmental Requirements - SMART Embedded Computing ATCA-F140 Series Installation And Use Manual

Hardware Preparation and Installation
2. Check for damage and report any damage or differences to our Contact Center at
https://www.smartembedded.com/ec/support/.
The blade is thoroughly inspected before shipment. If any damage occurs during
transportation or any items are missing, please notify our Contact Center via
https://www.smartembedded.com/ec/support/
3. Remove the desiccant bag shipped together with the blade.
NOTE: Improper disposal of used products may harm the environment. Always dispose of
used products according to your country's legislation and manufacturer's
instructions.
2.3

Requirements

This section shows the environmental and power requirements of the ATCA-F140 blade.
This product operates with dangerous voltages that can cause injury or death. Use
extreme caution when handling, testing, and adjusting this equipment and its
components.
2.3.1

Environmental Requirements

When operated in your particular system configuration, make sure that the blade meets the
environmental requirements specified in this section.
Operating temperatures refer to the temperature of the air circulating around the
blade, and not to component temperatures.
If you integrate the blade in your own non-SMART Embedded Computing system,
please contact your local sales representative for further safety information.
48
Hardware Preparation and Installation
immediately.
ATCA-F140 Series Installation and Use (6806800M67S)