About this Manual
Overview of Contents
This manual is divided into the following chapters and appendices.
Safety Notes on page 19
Notice de Sécurité on page 27
Sicherheitshinweise on page 35
Chapter 1, Introduction on page 43
standard compliances, mechanical data, and ordering information.
Chapter 2, Hardware Preparation and Installation on page 47
requirements, hardware accessories, and installation procedures.
Chapter 3, Controls, LEDs, and Connectors on page 67
blade. This include connectors, LEDs, and mechanical switches.
Chapter 4, Functional Description on page 91
description of major components of the blade.
Chapter 5, U-Boot on page 113
Appendix A, ATCA-F140-TCLK3 Information on page 125
the ATCA-F140-TCLK3 blade.
Appendix B, ATCA-F140-D Information on page 131
ATCA-F140-D blade.
Appendix C, Related Documentation on page 135
documentation, manufacturer's documents, and industry standard specifications.
ATCA-F140 Series Installation and Use (6806800M67S)
summarizes the safety instructions in the manual.
provides a French translation of the Safety Notes section.
provides a German translation of the Safety Notes section.
gives an overview of the features of the product,
includes a block diagram and functional
describes the boot firmware.
outlines the installation
describes external interfaces of the
contains information specific to
contains information specific to the
provides a listing of related product
11
Need help?
Do you have a question about the ATCA-F140 Series and is the answer not in the manual?