SMART Embedded Computing ATCA-F140 Series Installation And Use Manual page 25

SFP/SFP+ Module Damage
The optical port plug protects the optical fibers against dirt and damage. Dirt and damage
can render the SFP/SFP+ module inoperable.
Only remove the optical plug when you are ready to connect a cable to the SFP/SFP+
module. When no cable is connected cover the port with an optical port plug.
Laser
Personal Injury
If a label with the words CLASS 1 LASER PRODUCT is affixed to your system, the unit is
equipped with a laser device. These devices contain a laser system that produces visible
or invisible laser radiation (or both) and can be harmful to the eyes.
Seek supplemental information (power, wavelength, visibility, pulse duration, applicable
standards) prior to servicing equipment. Do not look at laser device with an optical
instrument at any time.
Battery
Blade Damage
Incorrect battery installation may result in a hazardous explosion and blade damage.
Always use the same type of lithium battery as is installed and make sure the battery is
installed as described in the manual.
Data Loss
Installing another battery type than the one mounted at product delivery may cause data
loss.
PCB and Battery Holder Damage
Do not use a screw driver to remove the battery from its holder. Removing the battery with
a screw driver may damage the PCB or the battery holder.
Environment
Environmental Damage
Improper disposal of used products may harm the environment.
Always dispose of used products according to your country's legislation and
manufacturer's instructions.
ATCA-F140 Series Installation and Use (6806800M67S)
Safety Notes
25