Repair; Safety Devices - SunStar SPS/E-BH6100-00 User Manual

4) Repair

Caution

5) Safety Devices

8
When the machine needs to be repaired, it shall be mended only by designated A/S
engineers who have completed training courses of SunStar.
ⓐ Cut off the power supply before cleaning or repairing the machine. After power
shut-down, wait for four minutes until electricity is completely discharged from
the machine.
ⓑ Without discussion with SunStar, modifying the specifications of the machine or
any parts is not allowed. Arbitrary change of the machine could cause dangers
during operation.
ⓒ Use the spare parts produced by Sunstar for repairing.
ⓓ Put safety covers which are removed for repair back to the machine after the
repairing is done.
ⓐ Safety label : Cautions during machine operation.
ⓑ Rear bed cover: prevents potential accidents which may occur during the rotation
of the timing belt.
ⓒ Side bed cover: prevents contact between fingers and thread securing devices.
ⓓ Finger guard: Prohibits fingers and needle from contacting each other.
ⓔ Safety plate: Prevents broken needle from injuring eyes.
ⓐ
ⓔ
ⓒ
ⓓ
ⓑ