Preparations Before Operating The Machine; Lubrication - SunStar SPS/E-BH6100-00 User Manual

5 5

Preparations before Operating the Machine

1) Lubrication

A. Check the oil volume in the oil tank installed on Arm.
See the arrow marked in the picture and use the oil inlet
around the arrow to feed oil into the machine.
[ CAUTION ]
When using the machine first time or when leaving the
machine unused for a long term, oil supply is a must.
B. Erect the machine and supply oil to the oil tank installed
on bed until the oil reaches the marked line of the tank.
C. Oil supply to the needle bar and zigzag device
Disassemble the face plate and the side cover. Drop oil to
the felt and the oil wick① until they are wet. Supply two
to three drops of oil to the needle bar② and the needle
bar block③.
20
①
③
①
[ Fig. 14 ]
[ Fig. 15 ]
①
②
[ Fig. 16 ]