4) Place lower thread
As shown in the figure below, hang the lower thread.
Lower thread
Deep thread
※ Leave the lower thread by 25mm or above after passing the throat plate hole.
5) Place inside thread
As shown in the figure below, hang the inside thread.
Lower thread
Deep thread
※ For 00 model, leave the deep thread by 25mm or above after passing the throat plate hole.
※ For 02 model, leave the deep thread by 4mm or above after passing the throat plate hole.
Lower thread guide pipe
Thread guide
01 Series
(00 Series)
(02 Series)
[ Fig. 21 ]
23