Installing The Fabric Output Device - SunStar SPS/E-BH6100-00 User Manual

7) Installing the fabric output device

A. Insert the hose② into the hose fitting① below the bed.
B. Pass the other end of the hose through the rear hole of the
bed base and fix the hose to the bed to prevent its free
movement.
C. Insert the hose coming from the bed base into the Y-union
③ and connect the hose of the air solenoid valve⒃ to the
Y-union③.
D. When the hose connection is finished, fix the hose and
other cables to prevent their free movement.
①
②
②
③
⒃
[ Fig. 12 ]
[ Fig. 13 ]
19