Placing The Machine On Top Of The Table - SunStar SPS/E-BH6100-00 User Manual

3) Placing the machine on top of the table

A. Attach the table support plate(front)① and the table
support plate(rear)② to the table with bolts, washers and
nuts.
B. Attach the control box③ and the power switch④ to the
table.
C. Place the machine on top of the table.
[ WARNING ]
To prevent safety accidents, at least two persons shall
handle the machine to place it on top of the table.
D. Attach the bed base support rubber① aligned with the
table hole. Place the bed base on the table and fasten the
bolt.
14
②
①
④
②
①
③
[ Fig. 1 ]
[ Fig. 2 ]