Installing The Attachment For Reinforced Stitches (Km-857J Series) - SunStar KM-857J Series User Manual

12) Installing the Attachment for
Reinforcement Stitch (KM-857J Series)
(1) Disassemble the post cover
(2) Replace the feed dog for reinforcement stitch ② and
assemble the post cover ① again.
(3) Install the needle plate for reinforcement stitch ③ and the
presser foot for reinforcement stitch ④.
(4) Use the post cover ① and assemble the attachment for
reinforcement stitch ⑤.
16
①.
④
③
②
⑤
①
[Figure 19]