Table of Contents
Advertisement
Structure of the machine
2 2
1) Names of Each Parts of the Machine
Installation of the machine
3 3
1) Environment for Machine Installation
(1) Do not use the machine where the voltage is over regular voltage ±10% to prevent accidents.
(2) Check the indicated pressure of the devices that use atmospheric pressure such as the air
cylinder to prevent any accidents from occurring.
(3) For safe operation of the machine, use the machine under the following conditions.
Surrounding Temperature During Operation : 5。 C~40。 C(41。 F~104。 F)
Surrounding Temperature During Maintenance : -10。 C~60。 C(14。 F~140。 F)
(4) Humidity : Between 20~80%(Relative humidity)
2) Electric Installment Conditions
(1) Power Voltage
·The power voltage must be between regular voltage ±10%
·The frequency of the power should be regular frequency (50/60HZ)±1%
(2) Electromagnetic Wave Noise
Use separate power with strong magnetics or high frequency products, and do not leave the
machine near them.
(3) Use low voltage when supplements or accessories are being adhered.
(4) Be careful not to have water or coffee be spilled into the Controller and Motor.
(5) Do not drop the Controller or Motor.
10
Arm
Post
Pedal
Thread Stand
Arm Supporter
Knee Lifting
[Fig. 1]
Advertisement
Table of Contents
