1.3.3.10
Configuring routes
The master station and the stations are in different IP subnets. To allow the master station to
communicate with the stations, the appropriate routes need to be created on the M826.
M826 in the master station: Configuring routes
1. Click "Layer 3" > "Routes" in the navigation panel.
2. Configure the routes with the following settings:
– Route to station 1
– Route to station 2
3. When you have entered the values, click "Create".
4. To update the display, click "Refresh".
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
Destination Network
Subnetmask
Gateway
Metric
Destination Network
Subnetmask
Gateway
Metric
Connecting SCALANCE M-800 to WAN
1.3 Connecting M826 with SHDSL
192.168.11.0
255.255.255.0
192.168.184.22
external IP address of the M826 in station 1
-1
192.168.50.0
255.255.255.0
192.168.184.42
external IP address of the M826 in station 2
-1
77