Related Manuals for Siemens RUGGEDCOM M969
Summary of Contents for Siemens RUGGEDCOM M969
- Page 1 Preface Introduction Installing the Device RUGGEDCOM M969 Communication Ports Technical Specifications Dimension Drawings Installation Guide Accessories Certification 03/2017 RC1039-EN-03...
-
Page 2: Security Information
Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. - Page 3 RUGGEDCOM M969 Installation Guide Contacting Siemens Address Telephone E-mail Siemens Canada Ltd Toll-free: 1 888 264 0006 ruggedcom.info.i-ia@siemens.com Industry Sector Tel: +1 905 856 5288 300 Applewood Crescent Fax: +1 905 856 1995 Concord, Ontario www.siemens.com/ruggedcom Canada, L4K 5C7...
- Page 4 RUGGEDCOM M969 Installation Guide...
-
Page 5: Table Of Contents
RUGGEDCOM M969 Installation Guide Table of Contents Table of Contents Preface ......................Alerts ..............................vii Related Documents ..........................viii Accessing Documentation ........................viii Training ............................viii Customer Support ..........................viii Chapter 1 Introduction ..................... 1.1 Feature Highlights ........................1 1.2 Description ........................... 2 Chapter 2 Installing the Device .................. - Page 6 RUGGEDCOM M969 Table of Contents Installation Guide 4.4.2 Gigabit Ethernet Optical Specifications ................23 4.5 Operating Environment ....................... 23 4.6 Mechanical Specifications ......................23 Chapter 5 Dimension Drawings ..................Chapter 6 Accessories ..................... 6.1 Power (1/unit) ..........................27 6.2 Console (1/unit) .......................... 28 6.3 Failsafe (1/unit) .......................... 29 6.4 Ethernet (8/unit) .........................
-
Page 7: Preface
Installation Guide Preface Preface This guide describes the RUGGEDCOM M969. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device. -
Page 8: Related Documents
Mobile App Install the Industry Online Support app by Siemens AG on any Android, Apple iOS or Windows mobile device and be able to: • Access Siemens' extensive library of support documentation, including FAQs and manuals • Submit SRs or check on the status of an existing SR •... -
Page 9: Introduction
IP65/IP67 rated for protection against strong jets of water (IP65) or temporary immersion in water (IP67). Designed to operate reliably in harsh environments, the RUGGEDCOM M969 provides a high level of tolerance to vibrations and shock impact; high level of immunity to electromagnetic interference; an operating temperature range of -40 to 85 °C (40 to 185 °F);... -
Page 10: Description
• Auto-negotiation on all 10/100Base-TX ports, 100FX on optic fiber ports • Auto-MDI/MDIX (crossover) on all 10/100Base-TX ports • LED indicators for link and activity Section 1.2 Description The RUGGEDCOM M969 features various ports, controls and indicator LEDs for connecting, configuring and troubleshooting the device. Description... - Page 11 Installation Guide Introduction Figure 1: RUGGEDCOM M969 (M12 Connectors Shown) 1. Copper Ethernet Ports 2. Port Status LED 3. POWER 1 LED 4. POWER 2 LED 5. ALARM LED 6. RS-232 Console Port 7. Failsafe Output Relay 8. M12 Power Supply Port 9. Fiber Optic Ethernet Ports 10. Surge Ground Connection 11. Chassis Ground Connection...
- Page 12 Introduction Installation Guide Figure 2: RUGGEDCOM M969 (RJ-45 Connectors Shown) 1. Copper Ethernet Ports 2. Port Status LED 3. POWER 1 LED 4. POWER 2 LED 5. ALARM LED 6. RS-232 Console Port 7. Failsafe Output Relay 8. M23 Power Supply Port 9. Fiber Optic Ethernet Ports 10. Surge Ground Connection 11. Chassis Ground Connection Port Status LED Indicate the status of each port.
-
Page 13: Communication Ports
RUGGEDCOM M969 Chapter 1 Installation Guide Introduction State Description Yellow (Solid) Link established Yellow (Blinking) Link activity No activity POWER LED 1/POWER LED 2 Illuminates when power is supplied to the associated internal power supply. ALARM LED Indicates when an alarm condition exists. - Page 14 Chapter 1 RUGGEDCOM M969 Introduction Installation Guide Description...
-
Page 15: Installing The Device
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens Canada Ltd could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment. -
Page 16: Mounting The Device
Section 2.6, “Ingress Protection” Section 2.1 Mounting the Device The RUGGEDCOM M969 is designed to be mounted on a panel by affixing the top and bottom flanges of the device to a panel using screws. IMPORTANT! Heat generated by the device is channeled outwards to the enclosure. As such, it is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the device to allow for some convectional... -
Page 17: Connecting Power
The M23 power connector has five terminal pins, which means two power supply sources are allowed to power the RUGGEDCOM M969 with the M23 power connector. The RUGGEDCOM M969 supports dual redundant power supplies: Power Supply 1 (PS1) and Power Supply 2 (PS2). -
Page 18: Power Supply Wiring
Installation Guide Section 2.2.2 Power Supply Wiring The following illustrates how to connect the RUGGEDCOM M969 to a single or dual power supplies. NOTE • For 100-240 VAC rated equipment, a 250 VAC appropriately rated circuit breaker must be installed. • For 88-300VDC rated equipment, a 300VDC appropriately rated circuit breaker must be installed. - Page 19 RUGGEDCOM M969 Chapter 2 Installation Guide Installing the Device Dual AC/DC Power Supply Wiring Figure 7: AC and AC Power Supply Wiring Example 1. M23 Power Connector 2. Ground Bus 3. Line 4. 250 VAC Breaker 5. Neutral 6. 110/230 VAC Power Source (PS2) 7. 110/230 VAC Power Source (PS1) 8. Safety Figure 8: AC and DC Power Supply Wiring Example...
-
Page 20: Disabling Line-To-Ground Transient Protection
Chapter 2 RUGGEDCOM M969 Installing the Device Installation Guide Figure 9: DC and DC Power Supply Wiring Example 1. M23 Power Connector 2. Ground Bus 3. 300 VDC Breaker 4. DC Power Source (PS2) 5. DC Power Source (PS1) Section 2.2.3 Disabling Line-to-Ground Transient Protection All line-to-ground transient energy is shunted to the Surge Ground terminal. In cases where users require the inputs to be isolated from ground, remove the ground braid between Surge and Chassis Ground. -
Page 21: Connecting The Failsafe Alarm Relay
Connecting the Failsafe Alarm Relay The Failsafe output relay is provided to signal critical error conditions that may occur on the RUGGEDCOM M969 series switches. The contacts are energized upon power up of the unit and remain energized until a critical error occurs. -
Page 22: Cabling Recommendations
Communication Ports Connect any of the available Ethernet ports on the device to a management switch and access the ROS console and Web interfaces via the device's IP address. The factory default IP address for the RUGGEDCOM M969 is https://192.168.0.1 For more information about available ports, refer to Chapter 3, Communication Ports... - Page 23 RUGGEDCOM M969 Chapter 2 Installation Guide Installing the Device Figure 13: Caps Ingress Protection...
- Page 24 Chapter 2 RUGGEDCOM M969 Installing the Device Installation Guide Ingress Protection...
-
Page 25: Communication Ports
Communication Ports Communication Ports The RUGGEDCOM M969 can be equipped with various types of communication ports to enhance its abilities and performance. To determine which ports are equipped on the device, refer to the factory data file available through ROS. For more information on how to access the factory data file, refer to the ROS User Guide for the RUGGEDCOM M969. -
Page 26: Copper Ethernet Ports
Section 3.1 Copper Ethernet Ports The RUGGEDCOM M969 supports eight 10/100Base-TX Ethernet ports that allow connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with RJ45 male connectors or M12 male connectors. The RJ45/M12 connectors are directly connected to chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables. -
Page 27: Fiber Optic Ethernet Ports
RUGGEDCOM M969 Chapter 3 Installation Guide Communication Ports M12 receptacles at either end. Ground loops can cause excessive noise and interference, but more importantly, create a potential shock hazard that can result in serious injury. Pin-Out (RJ45) The following is the pin-out description for the RJ45 connectors:... - Page 28 Chapter 3 RUGGEDCOM M969 Communication Ports Installation Guide Figure 18: LC Port 1. Tx Connector 2. Rx Connector For specifications on the available fiber optic Ethernet ports, refer to Section 4.4, “Fiber Optic Ethernet Port Specifications” Fiber Optic Ethernet Ports...
-
Page 29: Technical Specifications
RUGGEDCOM M969 Chapter 4 Installation Guide Technical Specifications Technical Specifications This section details the specifications and operating conditions of the device. CONTENTS • Section 4.1, “Power Supply Specifications” • Section 4.2, “Failsafe Alarm Relay Specifications” • Section 4.3, “Copper Ethernet Port Specifications” •... -
Page 30: Copper Ethernet Port Specifications
Distance 100 m (328 ft) Connector Type RJ45 or M12 Section 4.4 Fiber Optic Ethernet Port Specifications For maximum flexibility, Siemens offers a number of different transceiver choices for fiber optical communications. CONTENTS • Section 4.4.1, “Fast Ethernet Optical Specifications” • Section 4.4.2, “Gigabit Ethernet Optical Specifications”... -
Page 31: Gigabit Ethernet Optical Specifications
• All cabling is duplex type unless otherwise specified. • Maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associate when determining maximum segment distances. • All optical power numbers are listed as dBm averages. - Page 32 Chapter 4 RUGGEDCOM M969 Technical Specifications Installation Guide Enclosure Cast Aluminum Mechanical Specifications...
-
Page 33: Dimension Drawings
RUGGEDCOM M969 Chapter 5 Installation Guide Dimension Drawings Dimension Drawings NOTE All dimensions are in inches, unless otherwise stated. Figure 19: 8 RJ45 IP67 Ethernet Ports and M23 Power... - Page 34 Chapter 5 RUGGEDCOM M969 Dimension Drawings Installation Guide Figure 20: 8 M12 D-Code Ethernet Ports and M23 Power...
-
Page 35: Accessories
RUGGEDCOM M969 Chapter 6 Installation Guide Accessories Accessories This chapter details the various accessories available for the RUGGEDCOM M969. CONTENTS • Section 6.1, “Power (1/unit)” • Section 6.2, “Console (1/unit)” • Section 6.3, “Failsafe (1/unit)” • Section 6.4, “Ethernet (8/unit)” • Section 6.5, “LC Fiber Optic (2/unit)”... -
Page 36: Console (1/Unit)
Chapter 6 RUGGEDCOM M969 Accessories Installation Guide M23 Power Cable • Description Overmold R/A M23 plug to free end, 5m yellow PUR jacket, for dual power supply • Order Code 99-43-0129-001 • Cable Specifications Overmold R/A M23 plug to free end, 5 m Figure 22: M23 Power Cable... -
Page 37: Failsafe (1/Unit)
RUGGEDCOM M969 Chapter 6 Installation Guide Accessories M12 Console Port Mating Connector • Description M12-straight plug, 8 pole, A-coded, IP67 rated • Order Code 99-60-0002 Figure 24: M12 Console Port Mating Connector Section 6.3 Failsafe (1/unit) M12 FailSafe Port Mating Cable • Description M12 4pole A-coded;... -
Page 38: Ethernet (8/Unit)
Chapter 6 RUGGEDCOM M969 Accessories Installation Guide M12 FailSafe Port Mating Connector • Description M12-straight plug, 4 pole, A-coded, IP67 rated • Order Code 99-60-0009 Figure 26: M12 FailSafe Port Mating Connector Section 6.4 Ethernet (8/unit) M12 D-code Ethernet Port Mating Cable • Description M12 D-code to RJ-45;... - Page 39 RUGGEDCOM M969 Chapter 6 Installation Guide Accessories M12 D-code Ethernet Port Mating Connector • Description M12-straight plug, 4 pole, D-coded, IP67 rated • Order Code 99-60-0008 Figure 28: M12 D-code Ethernet Port Mating Connector M12 D-Code Ethernet Port Mating Cable • Description M12 male D-code to male D-code;...
- Page 40 Chapter 6 RUGGEDCOM M969 Accessories Installation Guide IP67 Metal RJ-45 Ethernet Port Mating Cable • Description IP67 Metal RJ-45 plug to RJ-45, CAT5e shielded patch cable, 3m • Order Code 99-43-0182-001 Figure 30: IP67 Metal RJ-45 Ethernet Port Mating Cable IP67 Metal RJ-45 Ethernet Port Mating Connector •...
-
Page 41: Lc Fiber Optic (2/Unit)
RUGGEDCOM M969 Chapter 6 Installation Guide Accessories IP67 Metal RJ-45 Ethernet Port Mating Cable • Description IP67 Metal RJ-45 plug on both ends; Category 5e shielded patch cable, 3m • Order Code 99-43-0039-001 Figure 32: IP67 Metal RJ-45 Ethernet Port Mating Cable Section 6.5... - Page 42 Chapter 6 RUGGEDCOM M969 Accessories Installation Guide • Description Cable Singlemode Metal IP67 LC to LC, Singlemode fiber cable 3 meters, IP67 rated • Order Code 99-43-0055-001 Figure 34: LC Port Mating Connector LC Port Mating Connector • Description Cable Multimode Metal IP67 LC to Metal IP67 LC, Multimode fiber cable 3meters, IP67 rated •...
- Page 43 RUGGEDCOM M969 Chapter 6 Installation Guide Accessories LC, RJ-45 Port Cap • Description RJ-45 outlet cap IP67, Metal • Order Code 99-60-0011 Figure 37: LC, RJ-45 Port Cap LC Fiber Optic (2/unit)
- Page 44 Chapter 6 RUGGEDCOM M969 Accessories Installation Guide LC Fiber Optic (2/unit)
-
Page 45: Certification
RUGGEDCOM M969 Chapter 7 Installation Guide Certification Certification The RUGGEDCOM M969 device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies. CONTENTS • Section 7.1, “Approvals” • Section 7.2, “MIL-STD Test Specifications”... -
Page 46: European Commission (Ec)
Information Technology Equipment – Radio Disturbance Characteristics – Limits and Methods of Measurement The device is marked with a CE marking and can be used throughout the European community. A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to “Contacting Siemens ”... -
Page 47: Industry Canada
Chapter 7 Installation Guide Certification Section 7.1.5 Industry Canada This device is declared by Siemens Canada Ltd to meet the requirements of the following Industry Canada standard: • CAN ICES-3 (A)/NMB-3 (A) Section 7.1.6 Other Approvals This device meets the requirements of the following additional standards: •... -
Page 48: Emc And Environmental Type Tests
High Impact Shock Test MIL-STD-1275B Power Quality MIL-STD-1399 DC Magnetic Field Testing Section 070 Part 1 Section 7.3 EMC and Environmental Type Tests The RUGGEDCOM M969 has passed the following EMC and environmental tests. IEC 61850-3 Type Tests Severity Test Description Test Levels Levels... -
Page 49: Ieee 1613 Type Tests
RUGGEDCOM M969 Chapter 7 Installation Guide Certification Severity Test Description Test Levels Levels AC Power ports ± 4 kV line-to-earth, ± 2 kV line-to-line IEC 61000-4-6 Induced Signal ports (Conducted) RFI DC Power ports 10 V AC Power ports 10 V... -
Page 50: Environmental Type Tests
Chapter 7 RUGGEDCOM M969 Certification Installation Guide Description Test Levels DC Power ports ± 4 kV AC Power ports ± 4 kV Earth ground ports ± 4 kV Oscillatory Signal ports 2.5 kV common mode @ 1MHz DC Power ports 2.5 kV common &...