Creating A Vpn Connection - Siemens SCALANCE M-800 Series Getting Started

Requirement
● The SCALANCE M-800 is connected to the WAN , refer to "Connecting SCALANCE M-
800 to the WAN (Page 81)".
● The SCALANCE M-800 can be reached via the Admin PC and you are logged in to the
WBM as "admin".
Steps in configuration
The following steps are necessary to create NETMAP rules:
1. Creating a VPN connection (Page 207)
2. Creating NETMAP rules (Page 209)
6.1.1

Creating a VPN connection

Procedure
1. Click on "Security" > "IPSec VPN" in the navigation area and on the "General" tab in the
content area.
2. Select "Activate IPSec VPN" and click "Set Values".
3. Click on the "Remote End" tab in the content area and create the VPN partner with the
following settings:
4. Click on the "Connections" tab in the content area and create the VPN connection with
the following settings:
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
On the M816
Remote End Name M876
Remote Mode Standard
Remote Typ manual
Remote Address Reachable via a dynamic DNS
service, e.g. example.no-ip.com
Remote Subnet 192.168.200.0/24
On the M816
Connection Name M816_to_M876
Operation disable
Keyping Protocol IKv2
Remote End Name M876
Local Subnet 192.168.10.0/24
NETMAP with SCALANCE M-800
6.1 NETMAP for the local network
On the M876
M816
Standard
manual
Fixed IP address (WAN IP address) of
the M816, e.g. 91.19.6.84
192.168.10.0/24
On the M876
M876_to_M816
disable
IKv2
M816
192.168.20.0/24
207