Downloading The Configuration To The Cp And Saving The M-800 Configuration - Siemens SCALANCE M-800 Series Getting Started

VPN tunnel between SCALANCE M-800 and security CPs
4.2 Secure VPN tunnel with PSK
Result
The configuration of the tunnel connection is complete. The settings are saved in the
configuration file.
4.2.1.3

Downloading the configuration to the CP and saving the M-800 configuration

Downloading the configuration to the CP
1. Close the Security Configuration Tool.
2. In HW Config, select the "Station" > "Save and Compile" menu.
3. Download the new configuration to the security module using the "PLC" > "Download to
Module ..." menu.
– For CP 1628: If the download was completed free of errors, the security module
– For CP 343-1 Advanced or CP 434-1 Advanced: Restart the S7 CPU following the
Saving the SCALANCE M-800 configuration
1. In STEP 7, open the Security Configuration Tool with the "Edit" > "Security Configuration
Tool" menu command.
2. In the content area, select the "M-800" and select the menu command "Transfer" > "To
module(s) ...".
3. Save the configuration file "Projectname.M-800.txt" in your project directory.
Result
The following file will be saved in the project directory:
● Configuration file: projectname.M-800.txt
The configuration file contains the exported configuration information for the SCALANCE M-
800.
Configuration file
IPsec VPN > Connections > VPN Standard Mode -
Edit Settings
Address of the remote site's VPN gateway:
91.19.6.84
Authentication method: Pre Shared Key
Pre Shared Key: 12345678
Remote ID: U28098881@GEA32
150
restarts automatically and the new configuration is activated.
download, to activate the new configuration
Settings in WBM
Security > IPSec VPN > Remote End > Remote Mode: Standard
Security > IPSec VPN > Remote End > Remote Address:
91.19.6.84/32
Security > IPSec VPN > Authentication > Authentication: PSK
Security > IPSec VPN > Authentication > PSK und PSK Confirma-
tion: 12345678
Security > IPSec VPN > Authentication > Remote ID
not required. In WBM, the IP address of the Industrial Ethernet
interface is entered. In this example, this is 192.168.184.2
Getting Started, 06/2015, C79000-G8976-C337-04
SCALANCE M-800 Getting Started