Creating Netmap Rules - Siemens SCALANCE M-800 Series Getting Started

NETMAP with SCALANCE M-800
6.2 NETMAP for the remote network
6.2.2

Creating NETMAP rules

Requirement
● The VPN connection M876_to_M816_2 is configured, see Creating a VPN connection
(Page 212).
Procedure
1. Click on "Layer 3" > "NAT" in the navigation area and on the "NETMAP" tab in the content
area.
2. Specify the NETMAP rule
3. Click "Create". A new row is created in the table with the settings.
4. Specify the NETMAP rule
5. Click "Create". A new row is created in the table with the settings.
6. Click "Set Values".
214
Type
Source Interface
Destination Interface
Source IP Subnet
Destination IP Subnet
Translated Destination IP Subnet
Type
Source Interface
Destination Interface
Source IP Subnet
Translated Source IP Subnet
Destination IP Subnet
for the outgoing queries with the following settings:
Destination
vlan1
IPSec M876_to_M816_2
192.168.20.0/24
192.168.100.0/24
192.168.10.0/24
for the incoming queries with the following settings:
Source
IPSec M876_to_M816_2
vlan1
192.168.10.0/24
192.168.100.0/24
192.168.20.0/24
Getting Started, 06/2015, C79000-G8976-C337-04
SCALANCE M-800 Getting Started