3.2.3.3
Configuring a VPN connection
Requirement
● The VPN remote end has been created.
Procedure
1. Click on "Security" > "IPSec VPN" in the navigation area and on the "Connection" tab in
the content area.
2. In "Connection Name" enter a name for the VPN connection.
3. Click "Create". A new row is created in the table.
4. Configure the VPN connection with the following settings:
5. Click "Set Values".
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
Operation
Keying Protocol
Remote End
Local Subnet
VPN tunnel between SCALANCE M-800 and S612
disabled
IKEv1
S612
Name of the VPN remote station
192.168.100.0/24
The local internal subnet 1 in CIDR notation.
3.2 Secure VPN tunnel with PSK
111